CEMS-CGA, RATA & Certification in California: 2026 Compliance Guide for Industrial Facilities
Is your Continuous Emissions Monitoring System actually producing data that regulators can rely on?
For many industrial facilities in California, having a CEMS (Continuous Emissions Monitoring System) installed is only the beginning. Depending on the applicable permit, air-district rules, and federal requirements, the system may need initial certification, quality assurance testing, Cylinder Gas Audits (CGA), Relative Accuracy Test Audits (RATA), ongoing QA/QC and periodic reporting.
For facilities regulated by the South Coast Air Quality Management District (South Coast AQMD), Rules 218, 218.2 and 218.3 establish important requirements for CEMS administration, certification, performance specifications and QA/QC. South Coast AQMD’s current rule book lists Rule 218 as amended March 5, 2021, and Rules 218.2 and 218.3 as amended September 2, 2022.
This makes professional CEMS Certification, CGA and RATA testing an important part of an industrial facility’s compliance strategy.
CEMS Certification California
What Is CEMS?
CEMS stands for Continuous Emission Monitoring System.
A CEMS continuously measures one or more emission parameters from an industrial source.
Depending on the application, it can monitor:
NOx
SO₂
CO
CO₂
Oxygen (O₂)
Flow rate
Moisture
Other regulated pollutants
A CEMS can continuously generate emissions data that may be used for compliance demonstrations, reporting and regulatory decision-making.
South Coast AQMD explains that CEMS can be required to continuously demonstrate compliance with permitted concentration limits and, for applicable RECLAIM systems, automatically report mass emissions.
The key point:
A CEMS is not automatically a compliance instrument simply because it is installed.
It must meet the applicable certification and performance requirements.
What Are CEMS Certification, RATA and CGA?
These three terms are closely connected but have different purposes.
CEMS Certification
Demonstrates that the monitoring system meets applicable regulatory performance and quality requirements and can function as an official data-reporting instrument.
RATA — Relative Accuracy Test Audit
Compares CEMS measurements against an applicable reference method to determine whether the CEMS is sufficiently accurate.
CGA — Cylinder Gas Audit
Challenges the CEMS with certified calibration/audit gases to verify analyzer response and measurement performance.
Together, they help answer:
Can regulators trust the emissions data being produced by the CEMS?
Why Is CEMS Compliance Important in California?
Industrial facilities may have strict emission limits for pollutants such as NOx, SO₂ and other contaminants.
When CEMS data are used to demonstrate compliance, inaccurate monitoring can create a serious problem.
A facility may believe it is compliant while the monitoring system is:
Drifting
Out of calibration
Producing invalid data
Experiencing excessive downtime
Outside required performance specifications
Operating outside its approved span range
Missing required QA/QC tests
South Coast AQMD Rule 218.3 provides requirements addressing CEMS performance, QA/QC, out-of-control periods and alternative data acquisition.
2026 California CEMS Regulatory Landscape
California’s CEMS requirements continue to evolve through local air-district rules, federal requirements and pollutant-specific monitoring programs.
For South Coast AQMD-regulated facilities, Rules 218, 218.2 and 218.3 remain central to CEMS requirements.
South Coast AQMD’s FY 2026–27 budget and objectives also continue to identify CEMS Certification as a compliance activity, demonstrating that CEMS review and certification remain an active regulatory function.
2026 takeaway:
CEMS should be treated as an ongoing compliance program—not a one-time installation project.
CEMS Certification: What Does the Process Involve?
For a new or modified CEMS, certification can involve multiple stages.
South Coast AQMD’s current CEMS application package describes a certification pathway that includes:
CEMS plan, where applicable
CEMS application
Quality Assurance Plan (QAP)
Initial District approval
Certification source-test protocol
District review/approval of the protocol
Certification source testing
Certification source-test report
District approval/final certification
Continuing QA/QC and periodic testing
Once certified, the CEMS remains subject to requirements involving maintenance, modifications, outages, records and periodic QA/QC testing such as RATAs.
This is why certification should be planned early.
A facility should not wait until the CEMS installation is complete before considering the certification process.
RATA Testing Company
What Is a RATA?
RATA = Relative Accuracy Test Audit.
A RATA evaluates how closely the CEMS measurement agrees with an applicable reference method.
In simple terms:
CEMS Result vs. Reference Method Result
The closer they agree, the more confidence regulators can have in the CEMS data.
South Coast AQMD defines relative accuracy in terms of the difference between CEMS-generated data and reference-method results, including the confidence coefficient.
A typical RATA may involve:
CEMS operating
↓
Reference-method sampling
↓
Simultaneous measurements
↓
Multiple test runs
↓
Statistical evaluation
↓
Relative accuracy calculation
↓
Pass / Fail determination
Why Is RATA Testing So Important?
Imagine your CEMS reports:
NOx = 45 ppm
But an approved reference method produces significantly different results.
Which number should regulators trust?
That’s exactly why RATA exists.
A successful RATA provides evidence that the CEMS is accurately measuring the emissions parameter within the applicable performance specification.
South Coast AQMD provides dedicated technical guidance for RATA-related issues, including RATA outliers and mass-emissions RATA for non-concurrent concentration and flow measurements.
What Is a CGA?
CGA = Cylinder Gas Audit.
During a CGA, the CEMS is challenged using gases with known certified concentrations.
Under federal EPA QA procedures, applicable CGA testing uses a zero-level gas and two upscale audit levels within specified ranges, with repeated injections designed to challenge the measurement system.
The basic concept is:
Known Gas → CEMS → Measured Value → Compare
If the CEMS response is outside the applicable tolerance, corrective action may be required.
RATA vs. CGA
Feature
RATA
CGA
Full Name
Relative Accuracy Test Audit
Cylinder Gas Audit
Main Purpose
Compare CEMS against reference method
Check analyzer response using known gases
Reference Method
Yes
No, uses certified gases
Field Sampling
Usually required
Gas challenge
Statistical Evaluation
Yes
Yes, according to applicable procedure
Frequency
Depends on applicable rule/program
Depends on applicable rule/program
Certification Role
Important
Important QA/QC component
Failure Response
Investigation/correction/retest as required
Calibration/correction/retest as required
Important:
Don’t assume that a CGA replaces a RATA in every regulatory program.
The applicable rule, permit and federal/state monitoring requirements determine what is required.
How Often Is RATA Required?
There is no single testing frequency for every California CEMS.
The interval depends on the applicable program.
For example, EPA’s Procedure 1 for applicable gas CEMS requires a RATA at least once every four calendar quarters, subject to the applicable provisions. It also provides for CGA-based quarterly QA in certain circumstances.
Other programs can have different requirements.
Your facility’s permit and applicable regulation control.
This is especially important for facilities operating under:
Title V
South Coast AQMD rules
RECLAIM-related requirements
Federal NSPS requirements
Federal NESHAP/MACT requirements
40 CFR Part 60
40 CFR Part 75
Pollutant-specific monitoring programs
RATA Certification
What Happens When a CEMS Fails QA/QC?
This is where CEMS compliance becomes particularly important.
A failed QA/QC test can result in an out-of-control period under applicable requirements.
South Coast AQMD Rule 218.3 provides that CEMS data generated during an applicable out-of-control period can be considered invalid for emission quantification in a compliance demonstration.
The facility may then need to:
Identify the problem
Correct the CEMS
Perform the required QA/QC test
Establish when valid data resumes
Evaluate affected data
Use an approved alternative data-acquisition method where applicable
Complete required reporting
This can become expensive if the issue is discovered too late.
Common Reasons CEMS Fail RATA or QA/QC
1. Analyzer Calibration Problems
Incorrect calibration can create measurement bias.
2. Sampling-System Problems
Leaks, condensation, contamination or sample-line problems can affect readings.
3. Span Range Problems
The selected span must be appropriate for the applicable requirements.
4. Moisture Interference
Moisture can affect certain monitoring systems if not properly accounted for.
5. Stratification
Non-uniform pollutant concentrations across the stack can affect comparison between the CEMS and reference method.
6. Flow Issues
Poor flow measurement can affect mass-emission calculations.
7. Aging Components
Sensors, analyzers, pumps and other components can degrade over time.
8. Poor Maintenance
A CEMS requires continuous attention.
CEMS Certification Is Not “Set It and Forget It”
A common mistake is:
Install CEMS → Get certified → Forget about it.
That’s not how an effective compliance program works.
After certification, facilities must continue managing:
Calibration + QA/QC + RATA + CGA + Maintenance + Data Availability + Records + Reporting
South Coast AQMD’s certification materials specifically state that certified CEMS remain subject to scheduled and unscheduled maintenance, outages, modifications, records/reporting and ongoing QA/QC.
2026 Update: CEMS Technology Is Expanding
CEMS requirements are also evolving for specialized pollutants.
A notable example is ethylene oxide (EtO).
South Coast AQMD entered into a July 2025 Memorandum of Understanding with Parter to help develop performance specifications, verification test protocols and implementation guidance for an EtO CEMS certification program. The MOU runs through December 31, 2026 unless extended.
This demonstrates an important industry trend:
Continuous monitoring is expanding beyond traditional NOx/SO₂ applications.
Facilities with specialized toxic-air-contaminant requirements should monitor regulatory developments closely.
CEMS and Environmental Compliance Are Becoming More Data-Driven
Modern air-quality compliance increasingly depends on continuous data.
Instead of relying only on periodic stack tests, regulators can use monitoring systems to evaluate:
Hourly emissions
Daily emissions
Operating conditions
Exceedances
Data availability
Control-device performance
Long-term trends
South Coast AQMD’s CEMS application materials state that applicable CEMS can continuously monitor compliance and automatically signal exceedances, breakdowns and out-of-control periods.
Accurate data is therefore a compliance asset.
Pros of CEMS, RATA, CGA & Certification
✅ 1. Continuous Compliance Visibility
CEMS provides ongoing emissions information rather than occasional snapshots.
✅ 2. Early Problem Detection
Abnormal emissions can potentially be identified faster.
✅ 3. Stronger Compliance Documentation
Certified monitoring data can support regulatory reporting where applicable.
✅ 4. Better Process Control
Operators can use emissions information to improve process operation.
✅ 5. Reduced Compliance Uncertainty
Routine QA/QC helps identify monitoring problems before they become major issues.
✅ 6. Better Long-Term Data
Historical CEMS information can help identify trends.
RATA Testing, Cylinder Gas Audit
Challenges / Cons
❌ Higher Initial Cost
Installing a compliant CEMS can require significant capital investment.
❌ Ongoing Maintenance
Analyzers, sampling systems and data-acquisition equipment require regular attention.
❌ QA/QC Requirements
RATA, CGA and other tests require planning and qualified personnel.
❌ Data Availability Issues
CEMS downtime can create compliance complications.
❌ Technical Complexity
CEMS involve instrumentation, electronics, sampling systems, software and regulatory requirements.
❌ Regulatory Changes
Changes to rules or permits can require modifications to the monitoring program.
But the cost of maintaining a reliable CEMS is usually easier to manage than discovering a monitoring failure during a compliance deadline.
Which Industries May Need CEMS Services?
Potential applications include:
Power & Energy
Power plants
Cogeneration facilities
Distributed generation
Manufacturing
Chemical plants
Metal processing
Cement
Glass
Manufacturing facilities
Petroleum & Chemical
Refineries
Petrochemical plants
Process facilities
Waste & Combustion
Waste-to-energy
Incineration
Thermal processing
Industrial Boilers
Large boilers
Steam generators
Process heaters
Other Regulated Sources
Facilities with permit or regulatory requirements for continuous monitoring.
EES can help bring these pieces together into one coordinated compliance program.
South Coast AQMD maintains a Laboratory Approval Program (LAP) under which laboratories and source-testing firms are evaluated method-by-method for personnel, equipment, documentation, QA and other criteria. Facilities should verify that the testing provider and applicable methods meet the requirements of their specific program.
RECLAIM Testing in California (2026): Latest Updates, Benefits, Challenges & How Energy Environmental Solutions, Inc. Helps Industries Stay Compliant
California’s RECLAIM (Regional Clean Air Incentives Market) program has entered a significant transition period. In 2026, facilities that historically operated under the South Coast AQMD RECLAIM Program are transitioning from the market-based RECLAIM system to a command-and-control regulatory structure with source-specific emission limits and Best Available Retrofit Control Technology (BARCT) requirements. This transition makes RECLAIM Testing, Source Testing, CEMS Certification, RATA, CGA, and Compliance Testing more important than ever for affected facilities.
For refineries, power plants, chemical manufacturers, glass plants, cement facilities, and other industrial operations, accurate emissions testing and regulatory reporting are essential to maintaining compliance during this transition.
Energy Environmental Solutions, Inc. (EES) provides comprehensive RECLAIM Compliance Testing, Source Testing, Stack Testing, CEMS Certification, Engineering Studies, and Regulatory Reporting to help industries successfully navigate California’s evolving environmental regulations.
RATA Testing Company
What Is RECLAIM Testing?
RECLAIM Testing verifies industrial emissions from facilities that have historically participated in South Coast AQMD’s RECLAIM program. These services help demonstrate compliance with permit conditions, emissions limits, and transition requirements.
Typical RECLAIM compliance services include:
RECLAIM Source Testing
Stack Emissions Testing
NOx & SOx Emissions Testing
CEMS Certification
Relative Accuracy Test Audits (RATA)
Cylinder Gas Audits (CGA)
Compliance Test Protocol Development
QA/QC Programs
Engineering Studies
Regulatory Reporting
Latest California RECLAIM News & Updates (2026)
1. RECLAIM Transition Continues
South Coast AQMD continues implementing the transition from the NOx RECLAIM Program to a command-and-control regulatory framework. Facilities are expected to comply with new equipment-specific requirements, updated permitting procedures, and BARCT implementation schedules.
2. Increased Source Testing Requirements
As facilities transition away from RECLAIM trading credits, regulators continue emphasizing:
Accurate emissions testing
Source-specific compliance
Certified monitoring systems
Inspection-ready documentation
Complete QA/QC procedures
Defensible emissions data
These measures help agencies verify compliance under the new regulatory framework.
3. Greater Importance of CEMS & RATA
Facilities operating Continuous Emissions Monitoring Systems (CEMS) continue to require:
Initial Certification
Recertification
Relative Accuracy Test Audits (RATA)
Cylinder Gas Audits (CGA)
Ongoing QA/QC
Reliable monitoring data remains a key component of regulatory compliance.
4. New Source Review (NSR) Changes
Facilities transitioning out of NOx RECLAIM may now need to comply with updated New Source Review (NSR) permitting requirements, including emission offsets and source-specific permitting considerations for equipment modifications.
Why RECLAIM Testing Is Important
Professional RECLAIM testing helps facilities:
Demonstrate regulatory compliance.
Verify NOx and SOx emissions.
Support permit modifications.
Maintain accurate CEMS data.
Reduce compliance risks.
Support inspections.
Improve operational efficiency.
Prepare for future regulatory requirements.
CEMS Certification California
Benefits of Professional RECLAIM Testing
Regulatory Compliance
Testing demonstrates compliance with South Coast AQMD, EPA, and applicable California regulations.
Accurate Emissions Data
EPA-approved testing methods produce reliable and technically defensible emissions results.
Better Operational Performance
Testing can identify combustion and process improvements that reduce emissions.
Reduced Compliance Risk
Routine testing helps identify issues before they become regulatory concerns.
Inspection-Ready Documentation
Complete reports simplify agency inspections and permit renewals.
Challenges Facilities May Face
Facilities transitioning from RECLAIM may encounter:
Changing regulatory requirements.
New permitting procedures.
Source-specific emission limits.
Increased documentation requirements.
CEMS certification and QA/QC obligations.
Equipment upgrades to meet BARCT standards.
Working with experienced environmental professionals helps facilities manage these challenges efficiently.
How Energy Environmental Solutions, Inc. Helps Industries
Energy Environmental Solutions, Inc. provides complete RECLAIM transition and environmental compliance support.
Our Services Include
RECLAIM Compliance Testing
Professional testing supporting South Coast AQMD transition requirements.
Source & Stack Testing
Accurate emissions testing using EPA, CARB, and Air District-approved methodologies.
NOx & SOx Emissions Testing
Reliable measurement of regulated pollutants for compliance demonstrations.
CEMS Services
CEMS Certification
Relative Accuracy Test Audits (RATA)
Cylinder Gas Audits (CGA)
Preventive Maintenance
QA/QC Programs
Compliance Test Protocol Development
Preparation of agency-ready testing protocols tailored to facility operations.
Engineering Studies
Technical evaluations supporting emissions reductions, equipment optimization, and permit compliance.
Compliance Reporting
Inspection-ready reports with complete QA/QC documentation, calibration records, and emissions calculations.
RATA Certification Services
Why Industries Choose EES
Energy Environmental Solutions, Inc. is trusted by industrial facilities across California because we provide:
✔ Experienced Environmental Engineers
✔ RECLAIM Transition Expertise
✔ EPA & California Regulatory Knowledge
✔ Accurate & Defensible Emissions Data
✔ Advanced Source Testing Equipment
✔ Comprehensive QA/QC Programs
✔ Fast Scheduling & Responsive Technical Support
✔ Inspection-Ready Documentation
✔ Reliable Compliance Reporting
✔ End-to-End Environmental Compliance Solutions
Industries We Serve
EES supports:
Petroleum Refineries
Power Generation Facilities
Chemical Manufacturers
Cement Plants
Glass Manufacturing
Food Processing Facilities
Pharmaceutical Manufacturers
Waste-to-Energy Plants
Industrial Boilers
Aerospace & Metal Processing
Manufacturing Facilities
Municipal Utilities
Partner with EES for Reliable RECLAIM Compliance
As California continues transitioning facilities away from the NOx RECLAIM program, professional emissions testing and regulatory support have become increasingly important.
Whether your facility requires RECLAIM Testing, Source Testing, Stack Testing, NOx & SOx Emissions Testing, CEMS Certification, RATA, CGA, Compliance Test Protocol Development, Engineering Studies, or Regulatory Reporting, Energy Environmental Solutions, Inc. has the expertise to help.
Our experienced team delivers technically sound testing, reliable emissions data, and inspection-ready reporting that helps facilities confidently meet EPA, CARB, and South Coast AQMD requirements.
CEMS-CGA, RATA & Certification Services in California (2026): Latest Updates, Benefits, Challenges & How Energy Environmental Solutions, Inc. Helps Industries Stay Compliant
California continues to enforce some of the nation’s most rigorous air quality regulations, making Continuous Emissions Monitoring Systems (CEMS) a critical compliance tool for many industrial facilities. In 2026, regulatory agencies are placing even greater emphasis on Continuous Emissions Monitoring System Certification, Relative Accuracy Test Audits (RATA), Cylinder Gas Audits (CGA), Quality Assurance (QA/QC), and defensible emissions data.
Facilities operating under EPA, CARB, and local Air District permits must ensure their CEMS remain properly certified, calibrated, and maintained to produce reliable emissions data. Failure to perform required audits or certification can result in invalid monitoring data, additional regulatory scrutiny, or permit compliance issues. Recent South Coast AQMD guidance also reinforces documentation, Quality Assurance Plans (QAPs), and certification procedures for new, modified, and recertified CEMS.
At Energy Environmental Solutions, Inc. (EES), we provide complete CEMS Certification, CGA, RATA, QA/QC, and Engineering Support Services to help industries achieve accurate emissions monitoring and regulatory compliance.
RATA Testing Company
What Are CEMS, CGA, RATA & Certification?
A Continuous Emissions Monitoring System (CEMS) continuously measures pollutant concentrations from industrial stacks and process equipment.
To maintain compliance, CEMS typically require:
Initial CEMS Certification
CEMS Recertification
Relative Accuracy Test Audit (RATA)
Cylinder Gas Audit (CGA)
Daily Calibration Drift Checks
Quarterly QA/QC Audits
Preventive Maintenance
Quality Assurance Plan (QAP)
Data Acquisition System (DAHS) Verification
Regulatory Reporting
These activities help ensure emissions data remains accurate, traceable, and acceptable to regulatory agencies.
Latest California News & Updates (2026)
1. South Coast AQMD Updated CEMS Certification Guidance
South Coast AQMD updated its CEMS Application and Certification documentation in 2026, reinforcing requirements for Quality Assurance Plans (QAPs), certification testing, documentation, and recertification procedures for both RECLAIM and non-RECLAIM facilities.
2. Greater Focus on QA/QC Programs
EPA continues to require robust QA/QC programs under 40 CFR Part 60, Appendix F, Procedure 1, including routine calibration drift checks, quarterly audits, and periodic RATA to maintain valid emissions data.
3. Increased Attention to Monitoring Plans
Recent industry guidance highlights the importance of updating monitoring plans and QA/QC documentation whenever CEMS are certified or modified. Clear agency communication and complete documentation help reduce compliance risk and monitoring downtime.
4. California Continues Strengthening Environmental Reporting
California continues expanding emissions reporting and climate compliance programs, increasing the importance of accurate CEMS data for regulatory reporting and long-term environmental planning.
CEMS Certification California
Why CEMS Certification, CGA & RATA Are Important
Routine certification and audits help facilities:
Demonstrate permit compliance.
Maintain valid emissions monitoring data.
Verify analyzer accuracy.
Improve data quality.
Support EPA, CARB, and Air District inspections.
Reduce the risk of invalid emissions records.
Maintain confidence in environmental reporting.
Support operational efficiency.
Benefits of Professional CEMS Services
Accurate Regulatory Compliance
Proper certification helps ensure monitoring systems meet EPA, CARB, and local Air District performance requirements.
Reliable Emissions Data
Routine CGA and RATA verify analyzer performance and improve confidence in reported emissions.
Reduced Compliance Risk
Scheduled audits help identify calibration or performance issues before they affect compliance.
Better Equipment Reliability
Preventive maintenance and QA/QC reduce unexpected downtime and improve system availability.
Inspection Readiness
Well-maintained monitoring systems and complete documentation simplify regulatory inspections.
Challenges Facilities May Face
Facilities operating CEMS commonly encounter:
Complex certification requirements.
Evolving regulatory expectations.
Specialized QA/QC procedures.
Detailed documentation and reporting.
Equipment maintenance and calibration demands.
Production scheduling around certification testing.
Partnering with experienced environmental specialists helps reduce these challenges and keeps projects on schedule.
How Energy Environmental Solutions, Inc. Helps Industries
Energy Environmental Solutions, Inc. provides complete CEMS compliance support throughout California.
Our Services Include
CEMS Certification
Professional certification services supporting EPA, CARB, and Air District compliance.
Relative Accuracy Test Audits (RATA)
Independent performance evaluations comparing CEMS data with EPA reference methods.
Cylinder Gas Audits (CGA)
Routine analyzer accuracy verification using certified calibration gases.
Accurate emissions testing using EPA-approved methodologies.
Air Quality Compliance Testing
Professional testing supporting permit demonstrations and regulatory reporting.
Compliance Test Protocol Development
Preparation of agency-ready testing protocols tailored to facility operations.
Engineering Studies
Technical evaluations supporting emissions reduction, system optimization, and permitting.
Compliance Reporting
Inspection-ready reports with complete QA/QC documentation, calibration records, and technical summaries.
RATA Certification Services
Why Industries Choose EES
Facilities throughout California trust Energy Environmental Solutions, Inc. because we provide:
✔ Experienced Environmental Engineers
✔ EPA & California Regulatory Expertise
✔ Certified CEMS Specialists
✔ Accurate & Defensible Monitoring Data
✔ Comprehensive QA/QC Programs
✔ Advanced Testing Equipment
✔ Fast Scheduling & Responsive Technical Support
✔ Inspection-Ready Documentation
✔ Reliable Compliance Reporting
✔ End-to-End Environmental Compliance Solutions
Industries We Serve
EES supports:
Petroleum Refineries
Power Generation Facilities
Cement Plants
Chemical Manufacturers
Waste-to-Energy Facilities
Food Processing Facilities
Pharmaceutical Manufacturers
Aerospace & Metal Processing
Manufacturing Plants
Industrial Boilers
Glass Manufacturing
Municipal Utilities
Partner with EES for Reliable CEMS Compliance
As California continues strengthening emissions monitoring and reporting requirements, professionally managed CEMS Certification, RATA, CGA, and QA/QC Services are essential for maintaining compliance.
Whether your facility requires CEMS Certification, Relative Accuracy Test Audits (RATA), Cylinder Gas Audits (CGA), Source Testing, Stack Testing, Air Quality Compliance Testing, Compliance Test Protocol Development, Engineering Studies, or Regulatory Reporting, Energy Environmental Solutions, Inc. has the expertise to help.
Our experienced team delivers technically sound certification services, accurate emissions data, and inspection-ready documentation that help facilities reduce compliance risk, improve monitoring reliability, and confidently meet EPA, CARB, and California Air District requirements.
Protect Your Permit. Protect Your Operations. Stay Compliant.
California has some of the most rigorous air quality regulations in the United States. Industries that emit regulated air pollutants are expected to continuously monitor emissions, verify monitoring accuracy, and maintain complete compliance records. This is why Continuous Emissions Monitoring Systems (CEMS), Cylinder Gas Audits (CGA), Relative Accuracy Test Audits (RATA), and Certification Services are essential for many industrial facilities operating in the state.
For facilities such as refineries, power plants, cement manufacturers, chemical processing facilities, waste-to-energy plants, and other regulated industries, these services are not just best practices—they are often required under operating permits and environmental regulations.
At Energy Environmental Solutions, Inc. (EES), we help industries meet these requirements with reliable testing, expert support, and accurate reporting.
Why Are CEMS, CGA, RATA & Certification Important?
Environmental agencies require facilities to demonstrate that emissions monitoring systems produce accurate, reliable, and traceable data. Continuous monitoring helps verify compliance with permit limits while supporting cleaner air and environmental protection.
These services help facilities:
Demonstrate compliance with environmental permits
Verify emissions monitoring system accuracy
Maintain reliable emissions records
Support regulatory inspections and audits
Reduce the risk of non-compliance
Improve confidence in reported emissions data
Reliable monitoring also enables facilities to identify operational issues early and make informed decisions before they become larger compliance problems.
What Is CEMS?
A Continuous Emissions Monitoring System (CEMS) continuously measures pollutants released from industrial processes and records emissions data for compliance reporting.
Facilities often use CEMS to monitor pollutants such as:
Nitrogen Oxides (NOx)
Sulfur Dioxide (SO₂)
Carbon Monoxide (CO)
Carbon Dioxide (CO₂)
Oxygen (O₂)
Opacity and other regulated parameters (depending on permit requirements)
CEMS provides continuous operational data that supports environmental reporting and regulatory compliance.
What Is RATA?
A Relative Accuracy Test Audit (RATA) evaluates the accuracy of a facility’s CEMS by comparing it with a certified reference test method.
Facilities remain compliant with applicable permit conditions
Routine RATA testing is an important part of maintaining confidence in emissions monitoring systems.
What Is CGA?
A Cylinder Gas Audit (CGA) evaluates analyzer performance using certified calibration gases.
CGA helps verify:
Analyzer calibration accuracy
Instrument performance
System precision
Long-term monitoring reliability
Regular audits help ensure that emissions monitoring equipment continues to perform as intended.
Why Is Certification Necessary?
Certification demonstrates that a monitoring system has been properly evaluated and is operating according to applicable performance requirements.
Certification and recertification may be required after:
Installation of a new monitoring system
Major equipment modifications
Repairs affecting system performance
Regulatory or permit requirements
Maintaining current certifications supports continuous compliance and helps prepare facilities for inspections.
Risks of Delaying Compliance
Waiting until an inspection or regulatory review to address monitoring requirements can create unnecessary challenges, including:
Delays in regulatory approvals
Increased corrective maintenance
Permit compliance issues
Operational disruptions
Additional testing requirements
Increased project costs
A proactive compliance strategy helps facilities avoid these situations while maintaining confidence in their emissions monitoring programs.
How Energy Environmental Solutions, Inc. Helps Industries
At Energy Environmental Solutions, Inc. (EES), we understand the technical and regulatory challenges industries face. Our experienced team provides complete emissions monitoring support designed to help facilities maintain compliance efficiently and confidently.
Our Services Include
Continuous Emissions Monitoring System (CEMS)
Installation Support
Performance Evaluations
Compliance Assistance
System Troubleshooting
Relative Accuracy Test Audits (RATA)
Initial Testing
Periodic Audits
Recertification Support
Performance Verification
Cylinder Gas Audits (CGA)
Calibration Verification
Analyzer Performance Checks
QA/QC Support
Certification Services
Initial Certification
Recertification
Regulatory Documentation
Permit Compliance Support
Additional Compliance Support
Source Emissions Testing
Stack Testing
Data Validation
Compliance Reporting
Engineering Support
QA/QC Reviews
Why Customers Choose EES
Companies across California choose EES because we provide more than testing—we provide confidence.
Our customers benefit from:
✔ Experienced Environmental Professionals
✔ Accurate & Defensible Data
✔ Fast Project Scheduling
✔ Reliable Reporting
✔ Comprehensive QA/QC
✔ Regulatory Guidance
✔ Complete Documentation
✔ Responsive Customer Support
✔ Industry-Specific Expertise
✔ Efficient Turnaround Times
Industries We Support
EES proudly serves:
Petroleum Refineries
Power Plants
Cement Manufacturing
Chemical Processing Facilities
Waste-to-Energy Plants
Industrial Boilers
Food Processing Facilities
Manufacturing Plants
Municipal Utilities
Pulp & Paper Facilities
Stay Inspection-Ready with EES
Environmental compliance is an ongoing responsibility. Accurate monitoring, proper certification, and dependable reporting help facilities operate confidently while meeting regulatory expectations.
Whether your facility needs CEMS support, CGA evaluations, RATA testing, certification, or complete emissions compliance services, Energy Environmental Solutions, Inc. is ready to help.
Our team delivers technically sound testing, responsive service, and high-quality documentation so you can focus on running your operations while we help support your compliance objectives.
