Rule 1147 California 2026 | NOx Testing & Compliance Services | Source Tester | EES
Rule 1147 in California 2026: Latest Updates, Pros, Cons & How EES Helps Industries
Rule 1147 — NOx Reductions from Miscellaneous Sources is an important South Coast AQMD regulation for certain fuel-fired combustion equipment in Southern California. It is designed to reduce nitrogen oxide (NOx) emissions while limiting carbon monoxide (CO) from permitted gaseous- and liquid-fuel-fired equipment that is not covered by another applicable Regulation XI rule.
Important: Rule 1147 is not a statewide California rule. It applies within the South Coast AQMD jurisdiction to equipment meeting the rule’s applicability requirements. Other California air districts have their own rules and permit requirements.
For industrial facilities operating spray-booth heaters, ovens, dryers, furnaces, thermal oxidizers, afterburners, vapor incinerators, tenter-frame dryers, process heaters and other miscellaneous combustion equipment, understanding the current Rule 1147 requirements can be critical to avoiding compliance problems.
Energy Environmental Solutions, Inc. (EES) helps facilities with Rule 1147 source testing, NOx testing, CO testing, compliance test protocol development, emissions testing, CEMS/RATA/CGA, engineering studies and regulatory reporting.
What Is South Coast AQMD Rule 1147?
Rule 1147 was adopted in 2008 and most recently amended on May 6, 2022. The current South Coast AQMD rulebook identifies it as Rule 1147 — NOx Reductions from Miscellaneous Sources.
The rule applies to certain gaseous- and/or liquid-fuel-fired combustion equipment requiring a South Coast AQMD permit, when another Regulation XI rule does not already apply to the unit.
Covered equipment can include categories such as:
- Thermal oxidizers
- Catalytic oxidizers
- Afterburners
- Vapor incinerators
- Ovens
- Dryers
- Dehydrators
- Heaters
- Furnaces
- Kilns
- Calciners
- Cookers
- Roasters
- Tenter-frame dryers
- Fabric and carpet dryers
- Remediation units
- Certain liquid-fuel-fired equipment
The exact applicability depends on the equipment, fuel, rated heat-input capacity, permit status and other provisions of the rule.
Why Does Rule 1147 Matter in 2026?
The environmental reason is straightforward: NOx contributes to ozone and particulate pollution, making NOx reductions an important component of regional air-quality planning.
South Coast AQMD’s Rule 1147 technology assessment explains that the rule’s NOx reductions are an important part of the region’s attainment strategy for federal and state ambient air-quality standards, including standards for ozone, PM2.5 and PM10.
And the need for effective air-quality controls remains highly relevant in 2026. South Coast AQMD’s current 2026 news and regulatory activity includes ozone advisories, particulate-related actions, toxic-air-contaminant rulemaking and additional emissions-control initiatives.
The compliance message for industry:
NOx compliance is not simply about installing a burner or combustion system. Facilities need to demonstrate that applicable equipment actually operates within its required emissions limits.
Latest Rule 1147 Updates for 2026
1. The Current Rule Remains the May 6, 2022 Version
As of August 2026, South Coast AQMD’s current Regulation XI listing identifies Rule 1147 as amended May 6, 2022. There is no indication on the current official rule listing of a newer 2026 amendment to Rule 1147 itself.
That distinction is important.
“Latest 2026 update” does not mean Rule 1147 itself was amended in 2026. Instead, facilities need to consider the current Rule 1147 requirements alongside their current permits and other 2026 regulatory developments.
2. Source Testing Remains a Major Compliance Requirement
For units subject to Rule 1147 with NOx emissions of at least 1 pound per day, the rule requires source testing to demonstrate compliance with applicable NOx and CO limits in the rule or permit.
The testing frequency depends on the equipment’s Rated Heat Input Capacity:
| Rated Heat Input Capacity | Source-Test Frequency |
|---|---|
| < 10 MMBtu/hr | Every 5 calendar years |
| ≥ 10 and < 40 MMBtu/hr | Every 3 calendar years |
| ≥ 40 MMBtu/hr | Every calendar year |
| ≥40 MMBtu/hr with ≥6 months shutdown | Test within 90 days after resumed operation, subject to the rule’s conditions |
These intervals are specified in Rule 1147 paragraph (h)(12).
This is one of the most important points for facility managers:
Your source-test due date can depend directly on the equipment’s rated heat-input capacity and NOx emissions.
3. Rule 1147 Requires an Approved Test Protocol
Source testing isn’t simply a matter of sending a technician to the facility and taking measurements.
Rule 1147 requires the operator to submit a source-test protocol to the Executive Officer for approval no later than 90 days before the scheduled source test, subject to the rule’s timing provisions.
For subsequent compliance determinations, protocol resubmission may not be necessary when an approved protocol already exists, provided the unit has not been modified in a way requiring a permit modification and the applicable limits have not become more stringent.
Why does this matter?
Because an improperly planned test can create unnecessary delays, additional costs and potentially unusable compliance data.
Test planning should happen before the test day—not after.
4. Independent Testing Is Required
Rule 1147 requires compliance determinations to be conducted by an independent contractor approved by the Executive Officer under the Laboratory Approval Program for the applicable test methods.
That means facilities should verify that their selected testing company has the appropriate qualifications and approvals for the methods being used.
This is particularly important when a facility is approaching a regulatory deadline.
5. Recordkeeping Still Matters
Rule 1147 requires source-test reports and maintenance records to be maintained for at least five years and made available to South Coast AQMD personnel upon request.
This means compliance doesn’t end when the testing crew leaves the site.
Your facility should maintain:
- Source-test reports
- Maintenance records
- Rated heat-input information
- Fuel records where applicable
- CEMS records where applicable
- Compliance documentation
- Approved testing protocols
- Equipment modification records
Good documentation can be as important as good testing.
What Emission Limits Does Rule 1147 Establish?
Rule 1147 contains different NOx and CO limits depending on the equipment category, fuel type, process temperature and whether the unit is an in-use unit or subject to the newer Table 2 requirements.
For example, Table 1 includes different limits for equipment such as thermal oxidizers, ovens, heaters, dryers and other combustion equipment.
For certain gaseous-fuel-fired thermal oxidizers, catalytic oxidizers, afterburners and vapor incinerators, the Table 1 NOx limit is 60 ppmv or 0.073 lb/MMBtu, with a CO limit of 1,000 ppmv.
Table 2 establishes more stringent requirements for applicable equipment.
For example, gaseous-fuel-fired thermal oxidizers, catalytic oxidizers, afterburners and vapor incinerators are listed at 20 ppmv or 0.024 lb/MMBtu NOx under Table 2.
Do not assume these numbers automatically apply to your equipment. The applicable limit must be determined from the rule, equipment category, permit and compliance schedule.
A Key 2026 Compliance Option: Less Than 1 Pound of NOx Per Day
Rule 1147 provides an alternative pathway for certain units.
An owner or operator may elect to comply by demonstrating NOx emissions below 1 pound per day averaged over a calendar month, or by meeting an existing permit limit below 1 pound per day, whichever is applicable under the rule.
However, if the facility fails to demonstrate compliance with that option, additional permit and compliance requirements can be triggered.
This makes accurate emissions calculations and recordkeeping particularly important.
Pros of Rule 1147 Compliance
1. Lower NOx Emissions
The primary environmental benefit is reduced NOx emissions from miscellaneous combustion sources.
Lower NOx contributes to regional efforts to address ozone and particulate pollution. South Coast AQMD describes Rule 1147’s NOx reductions as an important component of its attainment strategy.
2. Better Combustion Performance
Testing can reveal problems involving burners, combustion-air systems, controls or operating conditions.
A failed or borderline test can therefore become an opportunity to identify equipment problems.
3. More Reliable Compliance Data
Professional source testing provides measured emissions data instead of relying exclusively on theoretical calculations or equipment specifications.
4. Better Maintenance Decisions
Testing results can help environmental and maintenance teams identify whether combustion equipment needs adjustment, repair or modernization.
5. Improved Regulatory Readiness
Maintaining current testing and maintenance records can make inspections and compliance reviews easier.
Cons and Challenges of Rule 1147
1. Testing Costs
Source testing requires specialized equipment, qualified personnel, laboratory or analytical resources and technical reporting.
2. Production Disruption
Testing may need to occur under specific operating conditions, which can require coordination with production schedules.
3. Protocol Approval Takes Planning
The requirement for an approved test protocol means facilities need to start preparing well before the actual test date.
4. Equipment Modifications Can Change Requirements
Changes to burners, combustion systems, fuel systems or operating conditions may affect the compliance pathway.
5. Multiple Equipment Categories
Rule 1147 covers a wide variety of equipment, so the correct testing approach is not identical for every unit.
6. Testing at the Wrong Operating Condition Can Create Problems
Rule 1147 specifies operating conditions for compliance determinations, including testing at the maximum heat-input range at which the unit normally operates and additional conditions for specified equipment categories.
What Equipment Should California Facilities Review?
If your facility is located in the South Coast AQMD jurisdiction, review Rule 1147 applicability if you operate permitted fuel-fired equipment such as:
Thermal Oxidizers • Afterburners • Vapor Incinerators • Ovens • Dryers • Heaters • Furnaces • Kilns • Tenter-Frame Dryers • Fabric Dryers • Carpet Dryers • Cookers • Roasters • Dehydrators • Remediation Units
The actual applicability must be confirmed against the current rule and permit.
How EES Helps With Rule 1147 Compliance
Energy Environmental Solutions, Inc. (EES) provides technical testing and environmental compliance support for industrial facilities.
Rule 1147 Source Testing
EES can assist with testing programs designed to demonstrate applicable NOx and CO emission compliance.
Compliance Test Protocol Development
EES helps develop testing protocols covering:
- Sampling locations
- Applicable test methods
- Operating conditions
- Test runs
- QA/QC
- Calculations
- Reporting requirements
NOx Testing
Accurate NOx measurements are central to Rule 1147 compliance.
CO Testing
Rule 1147 also establishes CO requirements for applicable equipment, making CO testing an important part of many compliance demonstrations.
CEMS / RATA / CGA
For facilities using continuous emissions monitoring systems, EES can support applicable CEMS, RATA and CGA requirements.
Rule 1147 also provides circumstances in which qualifying periodic monitoring or CEMS relative-accuracy testing may be used as part of the source-testing compliance schedule.
Engineering Studies
EES can help facilities evaluate combustion-system performance, emissions trends and potential compliance strategies.
Regulatory Reporting
Testing isn’t complete until the data have been properly evaluated and documented.
EES can help prepare organized technical reports and supporting documentation.
Rule 1147 Compliance Testing Process
A professional compliance project generally follows this sequence:
1. Review the Permit
Determine the applicable permit limits and conditions.
2. Confirm Rule Applicability
Determine whether Rule 1147 applies to the unit.
3. Determine Testing Frequency
Review NOx emissions and rated heat-input capacity.
4. Develop the Test Protocol
Select appropriate methods and operating conditions.
5. Submit for Approval
Follow South Coast AQMD protocol-approval requirements.
6. Conduct Field Testing
Perform NOx, CO and supporting measurements.
7. QA/QC Review
Review calibration, field data and calculations.
8. Calculate Emissions
Determine compliance with the applicable limit.
9. Prepare the Report
Document the test conditions, methods, results and conclusions.
10. Maintain Records
Retain required documentation for the applicable period.
Why Proactive Rule 1147 Testing Makes Sense in 2026
South Coast AQMD states that its compliance staff conduct regular inspections to ensure equipment and processes are operating in compliance with applicable clean-air rules.
The agency also explains that failure to correct a Notice to Comply can lead to a Notice of Violation and penalties, while continuing violations can result in daily penalties.
That is why waiting until an inspector identifies a problem is a risky compliance strategy.
A better approach:
Know your limit.
Know your test date.
Know your operating conditions.
Know your documentation.
Rule 1147 Compliance Checklist for 2026
Before your next test, review:
- Is the unit subject to Rule 1147?
- Is the current permit available?
- What NOx limit applies?
- What CO limit applies?
- What is the unit’s rated heat-input capacity?
- Is NOx ≥1 lb/day?
- When was the last approved source test?
- Is the next test due?
- Has the test protocol been approved?
- Has the equipment been modified?
- Are operating conditions representative?
- Are maintenance records current?
- Are required fuel meters installed and maintained?
- Are five years of required records available?
- Is the testing contractor appropriately approved?
2026 Bottom Line
Rule 1147 remains an important South Coast AQMD NOx-compliance requirement in 2026. Although the rule itself was last amended on May 6, 2022, its current requirements continue to govern applicable miscellaneous combustion equipment, including specific source-testing frequencies, test protocols, NOx/CO limits and recordkeeping requirements.
For facilities with applicable equipment, the biggest mistake is assuming that “the equipment has always passed” means the next test can be treated casually.
Equipment ages. Burners are replaced. Processes change. Permits change. Operating conditions change.
And compliance requirements need to be checked against the current rule and permit.
Is your Rule 1147 source test due in 2026?
Are your NOx and CO emissions within the applicable limits?
Is your test protocol ready for South Coast AQMD approval?
Are your records inspection-ready?
If you’re uncertain, now is the right time to review your equipment and testing schedule.
Need Rule 1147 Testing in California?
Energy Environmental Solutions, Inc. (EES) helps industries with:
Rule 1147 Source Testing | NOx Testing | CO Testing | Compliance Test Protocol Development | Thermal Oxidizer Testing | Oven & Dryer Testing | Furnace Testing | Source & Stack Testing | CEMS | RATA | CGA | Engineering Studies | QA/QC | Regulatory Reporting
Measure Emissions. Verify Compliance. Protect Your Operations.
EES — Energy Environmental Solutions, Inc.
Phone: 714-630-5210 | 714-630-7844
Email: info@sourcetester.com
Website: sourcetester.org
